My publications ...
- van Lenthe G.H., M.C. de Waal Malefijt, and R. Huiskes (1996), Total knee arthroplasty can cause strain-adaptive bone resorption in the distal femur, 6th Annual Meeting of the European Orthopedic Research Society, p. 4. Bergen, Norway, June 15-16.
- van Lenthe G.H., B. van Rietbergen, and R. Huiskes (1996), Morphological characterization of trabecular bone, Mechanobiology of tissue adaptation. Nijmegen, the Netherlands, June 16.
- van Lenthe G.H., M.C. de Waal Malefijt, and R. Huiskes (1996), Distal femoral bone resorption after total knee replacement can be predicted by computer simulations, 2nd World Congres on Alternatives and Animal Use in the Life Sciences, p. 225. Utrecht, the Netherlands, Oct 20-24.
- van Lenthe G.H., M.C. de Waal Malefijt, and R. Huiskes (1996), Total knee arthroplasty can cause strain-adaptive bone resorption in the distal femur, World Biomechanics Symposium. Amsterdam, the Netherlands, Nov 7.
- van Lenthe G.H., M.C. de Waal Malefijt, and R. Huiskes (1996), Bone resorption in the distal femur after implantation of a total knee prosthesis, Acta Orthop.Scand. 67 (Suppl. 272): 33.
- van Lenthe G.H., and R. Huiskes (1997), Can morphology provide accurate estimates of bone mechanical properties?, 5th Annual Meeting on Computational Methods in Orthopaedic Biomechanics, p. 11. San Francisco, USA, Feb 8.
- van Lenthe G.H., and R. Huiskes (1997), Are estimates of bone mechanical properties from morphology dependable?, 7th Annual Meeting of the European Orthopedic Research Society, p. 5. Barcelona, Spain, April 24-27.
- Kerner J., R. Huiskes, G.H. van Lenthe, H. Weinans, B. van Rietbergen, C.A. Engh, and A.A. Amis (1997), Computer simulation of periprosthetic bone resorption. Simulations versus retrieval studies, 7th Annual Meeting of the European Orthopaedic Research Society, p. 61. Barcelona, Spain, April 24-27.
- van Lenthe G.H., M.C. de Waal Malefijt, and R. Huiskes (1998), Distal femoral bone resorption after total knee replacement can be predicted by computer simulations, Joint meeting of Anat. Soc. of Great Britain and Ireland, Anat. Soc. of Southern Africa and Nederlands Anatomen Ver., p. 34. Kerkrade, the Netherlands, April 15-17.
- Willems M.M., G.H. van Lenthe, N. Verdonschot, M.C. de Waal Malefijt, and R. Huiskes (1998), Fixation methods of a stemmed femoral component of a total knee replacement strongly influence eventual bone loss, 8th Annual Meeting of the European Orthopaedic Research Society, p. 51. Amsterdam, the Netherlands, May 7-10.
- van Lenthe G.H., and R. Huiskes (1998), Morphology accurately predicts mechanical properties of trabecular bone with uniform thickness, 11th Conference of the European Society of Biomechanics, p. 23. Toulouse, France, July 8-11.
- Huiskes R., R. Ruimerman, G.H. van Lenthe, and J.D. Janssen (1998), Indirect osteoclast-osteoblast coupling through mechanical stress relates trabecular morphogenesis and adaptation to bone turnover, Second Joint Meeting of The American Society for Bone and Mineral Research and The International Bone and Mineral Society, p. S344. San Francisco, California, USA, Dec 1-6.
- van den Bergh J.P., G.H. van Lenthe, A.R. Hermus, and R. Huiskes (1998), The ability of ultrasound and BMD to predict elastic and morphologic properties of bovine femoral bone specimens assessed by microCT based finite element analysis, Second Joint Meeting of The American Society for Bone and Mineral Research and The International Bone and Mineral Society, p. S320. San Francisco, USA, Dec 1-6.
- van Lenthe G.H., J.P. van den Bergh, A.R. Hermus, and R. Huiskes (1999), Determining the trabecular-bone tissue properties from ultrasound, micro-CT and large-scale finite-element analysis, 7th Annual Meeting on Computational Methods in Orthopaedic Biomechanics, p. 15. Orange, CA, USA, Jan 31.
- Huiskes R., R. Ruimerman, G.H. van Lenthe, and J.D. Janssen (1999), Osteocyte mechanosensory function could govern trabecular morphogenesis, adaptation and turnover, 26th Meeting of the European Calcified Tissue Society (Suppl. 1), p. S41. May 7-11.
- van Lenthe G.H., J.P. van den Bergh, A.R. Hermus, and R. Huiskes (1999), The mechanical properties of trabecular bone tissue can be determined from ultrasound, micro-CT and large scale finite element analysis, 26th Meeting of the European Calcified Tissue Society (Suppl.1), p. S100. Maastricht, the Netherlands, May 7-11.
- Huiskes R., R. Ruimerman, G.H. van Lenthe, and J.D. Janssen (1999), Wolff's Law can be explained as an effect of mechanically stimulated bone cell metabolism, 9th Annual Meeting of the European Orthopaedic Research Society, pp. O-51. Brussels, Belgium, June 3-4.
- van Lenthe G.H., J.P. van den Bergh, A.R. Hermus, and R. Huiskes (1999), The prospects of estimating trabecular-bone tissue properties from ultrasound, micro-CT and micro-finite element analysis, 9th Annual Meeting of the European Orthopaedic Research Society, pp. O-53. Brussels, Belgium, June 3-4.
- Huiskes R., G.H. van Lenthe, and R. Ruimerman (1999), Time-curve of BMD after menopause can be predicted from enhanced resorption only, 21st Annual Meeting of the American Society for Bone and Mineral Reserach (ASBMR), p. S270.
- Huiskes R., R. Ruimerman, G.H. van Lenthe, and J.D. Janssen (1999), Computer simulation: extending our creative minds in biomechanics research, ASME BED, p. 437.
- van Lenthe G.H., A.M.J. van Ooijen, W.D. van Marken Lichtenbelt, K.R. Westerterp, and A.A. van Steenhoven (2000), Heat transfer in humans. Determining heat transfer from temperature measurements, 2000 BMT Annual Research day. Maastricht, the Netherlands, May 8.
- van Ooijen A.M.J., W.D. van Marken Lichtenbelt, G.H. van Lenthe, A.A. van Steenhoven, and K.R. Westerterp (2000), Heat transfer in humans. Individual differences in body temperature and basal metabolic rate, 2000 BMT Annual Research day. Maastricht, the Netherlands, May 8.
- Bergmann G., F. Graichen, A. Rohlmann, N. Verdonschot, and G.H. van Lenthe (2000), Frictional heating in and around total hip implants, 12th Biannual Meeting of the European Society of Biomechanics, p. 142. Dublin, Ireland, Aug 28-30.
- Tanck E., J. Homminga, G.H. van Lenthe, and R. Huiskes (2000), Mechanical adaptation of mass preceeds that of architectural anisotropy in growing trabecular bone, 12th Biannual Meeting of the European Society of Biomechanics, p. 54. Dublin, Ireland, Aug 28-30.
- van Lenthe G.H., N. Verdonschot, G. Bergmann, and R. Huiskes (2000), The effect of implant material on friction induced heating around total hip implants, 12th Biannual Meeting of the European Society of Biomechanics, p. 143. Dublin, Ireland, Aug 28-30.
- Tanck E., G.H. van Lenthe, R.J. Wubbels, and R. Huiskes (2000), Trabecular bone architecture in the rat, normally and after long-term exposure to 2.5g, 10th Annual Meeting of the European Orthopaedic Research Society, pp. O-70. Wiesbaden, Germany, Oct 13-15.
- van Lenthe G.H., N. Verdonschot, G. Bergmann, and R. Huiskes (2000), The effect of implant material on friction induced heating around total hip implants, 10th Annual Meeting of the European Orthopaedic Research Society, pp. O-38. Wiesbaden, Germany, Oct 13-15.
- van Lenthe G.H., A.M.J. van Ooijen, W.D. van Marken Lichtenbelt, K.R. Westerterp, and A.A. van Steenhoven (2001), Heat transfer in humans. Validation of a computer simulation model, 2001 BMT Annual Research day. Veldhoven, the Netherlands, May 9.
- van Ooijen A.M.J., W.D. van Marken Lichtenbelt, G.H. van Lenthe, A.A. van Steenhoven, and K.R. Westerterp (2001), Heat transfer in humans. Ambient temperature, body temperature and resting metabolic rate, 2001 BMT Annual Research day. Veldhoven, the Netherlands, May 9.
- van Marken Lichtenbelt W.D., G.H. van Lenthe, A.M.J. van Ooijen, and A.A. van Steenhoven (2001), Heat flow and energy metabolism in humans, Bio-Fluid Mechanics. Eindhoven, the Netherlands, June 15.
- van Lenthe G.H., J. de Hoogh, W.P.M. Breed, and A.A. van Steenhoven (2001), Temperature distribution in the head during scalp cooling, Meeting of the Foundation for Fundamental Research on Matter.
- Hollister S.J., J.M. Taboas, R.D. Maddox, T.M. Chu, S.E. Feinberg, G.H. van Lenthe, S.K. Boyd, R. Müller, and P.H. Krebsbach (2002), Bone tissue engineering: the role of non-invasive bone assessment, 15th Int. Workshop on Bone Densitometry, p. 53. Monterey, USA, July 21-26.
- Stauber M., G.H. van Lenthe, D.J. Webster, and R. Müller (2003), A fast and efficient FE beam model for bone failure prediction, 13th Annual Meeting of the European Orthopaedic Research Society, p. 20. Helsinki, Finland, June 4-7.
- van Lenthe G.H., M. Stauber, S.J. Hollister, and R. Müller (2003), Internal scaffold architecture influences bone ingrowth, 13th Annual Meeting of the European Orthopaedic Research Society, p. 40. Helsinki, Finland, June 4-7.
- van Lenthe G.H., T. Kohler, L.R. Donahue, and R. Müller (2003), Functional phenomics of bone: high-throughput determination of bone strength, 25th Annual Meeting of the American Society for Bone and Mineral Research (ASBMR), p. S122. Minneapolis, USA, Sept 19-23.
- Hollister S.J., G.H. van Lenthe, C.L. Flanagan, A. Kasemkhani, T.M. Chu, J.M. Taboas, R. Müller, P.H. Krebsbach, and S.E. Feinberg (2003), Is there an optimal pore size and shape for bone regeneration?, 6th Annual Int. Conference and Exposition of the Tissue Engineering Society International, p. (online). Orlando, USA, Dec 10-13.
- van Lenthe G.H., and R. Müller (2004), Hierarchical bioimaging in the assessment of bone quality and the competence of bone, 6th Int. Symp. on Computer Methods in Biomechanics and Biomedical Engineering, p. 209. Madrid, Spain, Feb 25-28.
- van Lenthe G.H., R. Voide, T. Kohler, L.R. Donahue, and R. Müller (2004), Functional phenomics in genetic studies - a combined experimental and simulation approach for high-throughput characterization of bone, 6th Int. Symp. on Computer Methods in Biomechanics and Biomedical Engineering, p. 98. Madrid, Spain, Feb 25-28.
- Alonso Vázquez A., G.H. van Lenthe, M. Taylor, and R. Müller (2004), Comparison of mCT measurements and FE predictions of localised failure in a cancellous bone analogue material, 6th Int. Symp. on Computer Methods in Biomechanics and Biomedical Engineering, p. 50. Madrid, Spain, Feb 25-28.
- Hollister S.J., C.L. Flanagan, A. Kasemkhani, G.H. van Lenthe, T.M. Chu, J.M. Taboas, R. Müller, P.H. Krebsbach, and S.E. Feinberg (2004), Scaffold pore design effects on bone ingrowth and stiffness, Int. Association of Dental Research and American Association of Dental Research, p. 280. Honolulu, USA, March 10-13.
- Peter B., O. Gauthier, J. Guicheux, J.-M. Bouler, G.H. van Lenthe, R. Müller, P.-Y. Zambelli, and D.P. Pioletti (2004), Orthopaedic implant as drug delivery system: numerical, in vitro and in vivo approaches, 7th World Biomaterials Congress. Sydney, Australia, May 17-21.
- van Lenthe G.H., R. Voide, T. Kohler, L.R. Donahue, and R. Müller (2004), Computational and experimental analyses for high-throughput characterization of bone competence, 16th Int. Bone Densitometry Workshop, p. 165. Annecy, France, June 20-24.
- van Lenthe G.H., M. Stauber, and R. Müller (2004), Trabecular bone mechanical properties are accurately predicted using a fast and efficient FE beam model, 16th Int. Bone Densitometry Workshop, p. 96. Annecy, France, June 20-24.
- van Lenthe G.H., M. Stauber, and R. Müller (2004), A fast and efficient finite element model for accurate prediction of bone mechanical properties in man, 14th Conference of the European Society of Biomechanics (ESB), p. 280. 's-Hertogenbosch, The Netherlands, July 4-7.
- van Lenthe G.H., T. Kohler, L.R. Donahue, and R. Müller (2004), Murine femoral neck strength is genetically controlled but independent of bone mass and growth hormone, 14th Conference of the European Society of Biomechanics (ESB), p. 276. 's-Hertogenbosch, The Netherlands, July 4-7.
- Voide R., G.H. van Lenthe, and R. Müller (2004), Design and evaluation of an alignment device for high-throughput mechanical testing of murine femora, 14th Conference of the European Society of Biomechanics (ESB), p. 216. 's-Hertogenbosch, The Netherlands, July 4-7.
- Voide R., G.H. van Lenthe, and R. Müller (2004), Design and evaluation of an alignment device for high-throughput mechanical testing of murine femora, 2004 Annual Meeting, Swiss Society for Biomedical Engineering, p. 41. Zürich, Switserland, Sept 2-3.
- van Lenthe G.H., T. Kohler, R. Voide, L.R. Donahue, and R. Müller (2004), Functional phenomics in bone: high-throughput assessment of genetic differences in murine inbred strains, 26th Annual Meeting of the American Society for Bone and Mineral Research (ASBMR), p. S390. Seattle, USA, Oct 1-5.
- Peter B., O. Gauthier, J. Guicheux, J.-M. Bouler, G.H. van Lenthe, R. Müller, P.-Y. Zambelli, and D.P. Pioletti (2004), Zoledronate biocoating increases implant mechanical stability in rat femurs, 14th Annual Meeting of the European Orthopaedic Research Society, pp. O-10. Amsterdam, The Netherlands, Nov 25-27.
- Bohner M., G.H. van Lenthe, S. Gruenenfelder, W. Hirsiger, R. Evison, and R. Müller (2004), Synthesis and characterization of porous ß-tricalcium phosphate blocks, 9th Meeting of the Institute of Science and Technology for Ceramics (ISTEC). Faenza, Italy.
- Frahm R., M. Stuber, W. Görtz, G.H. van Lenthe, M. Stauber, R. Müller, and H.G. Simank (2004), Modifikationen von Titanimplantaten zur Verbesserung von Osteointegration - eine Pilotstudie am Tiermodell und Etablierung einer Methode zur zerstörungsfreien Festigkeitsmessung von Implantaten, 90.Tagung der Deutsche Gesellschaft für Orthopädie und Orthopädische Chirurgie. Berlin, Germany.
- van Lenthe G.H., T. Kohler, R. Voide, L.R. Donahue, and R. Müller (2005), Identifying genetic loci for bone quality parameters in murine inbred strains, Bone quality: what is it and can we measure it?, p. 43. Bethesda, USA, May 2-3.
- van Lenthe G.H., M. Stauber, and R. Müller (2005), An efficient finite element model for accurate prediction of trabecular bone mechanical properties in man, 2nd Joint Meeting of the European Calcified Tissue Society and the International Bone and Mineral Society, p. S 327. Geneva, Switzerland, June 25-29.
- van Lenthe G.H., R. Voide, and R. Müller (2005), Precise alignment of murine femora is mandatory for accurate assessment of bone strength, 2nd Joint Meeting of the European Calcified Tissue Society and the International Bone and Mineral Society, p. S. 326. Geneva, Switzerland, June 25-29.
- Müller R., A. Nazarian, P. Schneider, M. Stauber, P. Thurner, G.H. van Lenthe, and R. Voide (2005), Dynamic imaging of bone function - a hierarchical approach, 2nd Japan-Switzerland Workshop on Biomechanics - New Trends in Biomechanics: From Biomolecules to Tissue, p. 38. Kyoto, Japan, Sept 12-16.
- van Lenthe G.H., L.R. Donahue, and R. Müller (2005), Biomechanical differences between C3H and B6 inbred strains of mice depend on geometric differences, not on material differences, 27th Annual Meeting of the American Society for Bone and Mineral Research (ASBMR) (Suppl. 1), p. S339. Nashville, USA, Sept 23-27.
- van Lenthe G.H., T. Kohler, R. Voide, L.R. Donahue, and R. Müller (2005), High-throughput functional and morphological phenotyping of 2,000 murine femora, 27th Annual Meeting of the American Society for Bone and Mineral Research (ASBMR) (Suppl. 1), p. S123. Nashville, USA, Sept 23-27.
- Voide R., M. Stauber, P. Schneider, G.H. van Lenthe, P. Wyss, U. Sennhauser, M. Stampanoni, and R. Müller (2005), Microcracks initiation and propagation in murine cortical bone, 6th Swiss Light Source Users Meeting, p. 44. Villigen, Switzerland, Oct 17-18.
- Schneider P., M. Stauber, R. Voide, G.H. van Lenthe, M. Stampanoni, L.R. Donahue, and R. Müller (2005), Ultrastructural phenotyping of mouse skeleton, 6th Swiss Light Source Users Meeting, p. 19. Villigen, Switzerland, Oct 17-18.
- Schneider P., M. Stauber, R. Voide, G.H. van Lenthe, M. Stampanoni, L.R. Donahue, and R. Müller (2005), From microarchitecture to ultrastructure of murine bone: A hierarchical approach using synchrotron based micro-CT, 6th Swiss Light Source Users Meeting, p. 48. Villigen, Switzerland, Oct 17-18.
- Voide R., G.H. van Lenthe, and R. Müller (2005), Accurate alignment of murine femora is critical in bone mechanical testing, 2005 Annual Meeting, Swiss Society for Biomedical Engineering, p. T32. Lausanne, Switzerland.
- van Lenthe G.H., T. Kohler, R. Voide, L.R. Donahue, and R. Müller (2005), The effect of growth hormone on femoral neck strength accurately assessed by micro-FE analyses, 2nd International Conference on Computational Bioengineering. Lisbon, Portugal.
- Simank H.G., R. Frahm, M. Stuber, G.H. van Lenthe, and R. Müller (2006), Surface modification of titanium implants for improved osseointegration (german), XXVIII Munich Symposium for Experimental Orthopaedics. München, Germany, Feb 24-25.
- Voide R., G.H. van Lenthe, P. Schneider, P. Wyss, U. Sennhauser, M. Stampanoni, M. Stauber, and R. Müller (2006), Bone microcrack initiation and propagation – towards nano-tomographic imaging using synchrotron light, 5th World Congress of Biomechanics, p. S16. Munich, Germany, Jul 29 - Aug 4.
- Voide R., G.H. van Lenthe, and R. Müller (2006), Femoral neck stiffness critically depends on loading direction, 5th World Congress of Biomechanics, p. S11. Munich, Germany, Jul 29 - Aug 4.
- van Lenthe G.H., R. Voide, and R. Müller (2006), Beam theory strongly underestimates bone tissue properties in a murine model of bone genetics, 5th World Congress of Biomechanics, p. S18. Munich, Germany, Jul 29 - Aug 4.
- Wirth A.J., T.L. Mueller, G.H. van Lenthe, and R. Müller (2006), Assessment of mechanical stability in bone-implant constructs from high-resolution computed tomography-based finite element modeling, 3-Ländertreffen der Deutschen, Österreichischen und Schweizerischen Gesellschaft für Biomedizinische Technik p. P53. Zurich, Switzerland, Sept 6-9.
- Stauber M., L. Rapillard, G.H. van Lenthe, P. Zysset, and R. Müller (2006), Models based on local morphometry help improving our understanding of the relative importance of local structural changes in the determination of the stiffness of bone, 3-Ländertreffen der Deutschen, Österreichischen und Schweizerischen Gesellschaft für Biomedizinische Technik p. V9. Zurich, Switzerland, Sept 6-9.
- Morley P., G.H. van Lenthe, and R. Müller (2006), Automated processing of micro-CT data for non-destructive high-throughput analyses of mouse vertebral bone strength, 3-Ländertreffen der Deutschen, Österreichischen und Schweizerischen Gesellschaft für Biomedizinische Technik p. V12. Zurich, Switzerland, Sept 6-9.
- Voide R., M. Stauber, P. Schneider, G.H. van Lenthe, P. Wyss, U. Sennhauser, M. Stampanoni, and R. Müller (2006), Microdamage initiation and propagation in cortical bone, 3-Ländertreffen der Deutschen, Österreichischen und Schweizerischen Gesellschaft für Biomedizinische Technik p. V8. Zurich, Switzerland, Sept 6-9.
- Mueller T.L., G.H. van Lenthe, M. Stauber, C. Gratzke, F. Eckstein, and R. Müller (2006), Non-destructive prediction of individual radius bone strength: a population study as assessed by high-resolution 3d-pQCT, 3-Ländertreffen der Deutschen, Österreichischen und Schweizerischen Gesellschaft für Biomedizinische Technik p. V13. Zurich, Switzerland, Sept 6-9.
- Mueller T.L., G.H. van Lenthe, M. Stauber, C. Gratzke, F. Eckstein, and R. Müller (2006), Non-destructive prediction of individual bone strength as assessed by high-resolution 3D-pQCT in a population study of the human radius, 28th Annual Meeting of the Americal Society for Bone and Mineral Research (ASBMR), p. S232. Philadelphia, USA, Sept 15-19.
- Melton L.J., B.L. Riggs, R. Müller, G.H. van Lenthe, S.J. Achenbach, M.L. Bouxsein, and S. Khosla (2006), Forearm fracture prediction by load/strength and in vivo microstructure assessments, 28th Annual Meeting of the Americal Society for Bone and Mineral Research (ASBMR), p. S231. Pittsburg, USA, Sept 15-19.
- van Lenthe G.H., P. Morley, R. Voide, L.R. Donahue, and R. Müller (2006), Identifying genetic determinants of bone strength: a high-throughput phenomics approach in mice, CSCS User Day. Manno, Switzerland, Sept 25-26.
- Sala M., U. Mennel, P. Arbenz, G.H. van Lenthe, and R. Müller (2006), Multi-level micro-finite element analysis for human bone structures, CSCS User Day. Manno, Switzerland, Sept 25-26.
- Mueller T.L., G.H. van Lenthe, M. Stauber, C. Gratzke, F. Eckstein, and R. Müller (2006), Non-destructive prediction of individual human radius bone strength as assessed by high-resolution 3D-pQCT, 17th Int. Bone Densitometry Workshop, p. 60. Kyoto, Japan, Nov 5-9.
- van Lenthe G.H., R. Voide, P. Schneider, P. Wyss, U. Sennhauser, M. Stampanoni, M. Stauber, and R. Müller (2006), Three-dimensional time-lapsed imaging of bone microcrack initiation and propagation, 17th Int. Bone Densitometry Workshop, p. 63. Kyoto, Japan, Nov 5-9.
- van Lenthe G.H. (2006), High-throughput computational analyses of bone mechanics: from mice to men, 2nd GAMM seminar on continuum biomechanics. Freudenstadt-Lauterbad, Germany, Nov 22-24.
- Wirth A.J., T.L. Mueller, U. Mennel, M. Sala, P. Arbenz, G.H. van Lenthe, and R. Müller (2007), Stability of bone-implant constructs: a computational mechanics approach based on high resolution computed tomography, 15th Annual Meeting on Computational Methods in Orthopaedic Biomechanics, p. 32. San Diego, USA, Feb 10.
- Wirth A.J., T.L. Mueller, G.H. van Lenthe, J. Goldhahn, J. Schense, J. Watson, V. Jamieson, P. Messmer, O. Trentz, D. Uebelhart, D. Weishaupt, M. Egermann, and R. Müller (2007), Computational assessment of mechanical stability during fracture healing in humans based on high-resolution medical images, European Society of Biomechanics Workshop 2007, p. 102. Dublin, Ireland, Aug 26-28.
- Mueller T.L., M. Stauber, G.H. van Lenthe, C. Gratzke, F. Eckstein, and R. Müller (2007), Regional, age and gender differences in bone quality and their correlation to bone mechanical competence in the human radius, 2007 Annual Meeting, Swiss Society for Biomedical Engineering, p. 55. Neuchatel, Switzerland, Sept 13-14.
- Voide R., G.H. van Lenthe, and R. Müller (2007), Does femoral neck morphometry predict bone mechanical properties?, 2007 Annual Meeting, Swiss Society for Biomedical Engineering, p. 46. Neuchatel, Switzerland, Sept 13-14.
- Wirth A.J., T.L. Mueller, R. Müller, P. Arbenz, and G.H. van Lenthe (2007), Fast and automated analyses of bone-implant function from medical images using high-performance computing, 2007 Annual Meeting, Swiss Society for Biomedical Engineering, p. 49. Neuchatel, Switzerland, Sept 13-14.
- Cohen A., D.W. Dempster, R. Müller, E. Guo, X.H. Zhang, A.J. Wirth, G.H. van Lenthe, X.D. McMahon, H. Zhou, M.R. Rubin, J.P. Bilezikian, R.R. Recker, and E. Shane (2007), High resolution peripheral quantitative CT (HRpQCT) of the radius reflects iliac crest biopsy measures of microstructure and mechanical competence, 29th Annual Meeting of the American Society for Bone and Mineral Research (ASBMR), p. S47. Honolulu, USA, Sept 16-19.
- Pucher M.M., A.E. Tami, T.L. Mueller, G.H. van Lenthe, R. Müller, P.M. Montavon, and K. Ito (2007), The effect of hydroxyapatite (endobon) particles on implant osseointegration in osteoporotic trabecular bone, 6th Combined Meeting of the Orthopaedic Research Societies, p. Abstract #101. Honolulu, USA, Oct 20-24.
- Arbenz P., C. Bekas, A. Curioni, R. Müller, A.J. Wirth, and G.H. van Lenthe (2007), Large scale micro-finite element analysis of human bone structure on the IBM BlueGene/L supercomputer, Int. Conference for High Performance Computing, Networking, Storage, and Analysis (SC'07). Reno, NV, USA, Nov 10-16.
- Torcasio A., G.H. van Lenthe, and H. Van Oosterwyck (2007), Quantification of the systematic error related to three-point bending tests of murine bones, 7th Belgian Day on Biomedical Engineering, p. P.23. Brussels, Belgium, Nov. 30.
- van Lenthe G.H. (2007), Bone quality. From the laboratory to the clinic (in Dutch: Botkwaliteit. Van laboratorium naar kliniek), 2de Osteoposedag der Hoge Landen, pp. 8-9. Zwolle, the Netherlands, Dec. 7-8.
- Lau S.H., G.H. van Lenthe, A. Peele, H. Chang, H. Cui, M. Feser, and W. Yun (2008), Rapid non-invasive tomography of biological samples across length scales using a novel lab-based CT with resolution from mm to 30 nm, 20th Australian Conference on Microscopy and Microanalysis pp. 14-15. Perth, Australia, Feb. 10-15.
- Mueller T.L., A.J. Wirth, R. Müller, and G.H. van Lenthe (2008), Computational bone mechanics to determine bone strength of the human radius, 16th Annual Meeting on Computational Methods in Orthopaedic Biomechanics, p. 21. San Francisco, USA, March 1.
- Mueller T.L., A.J. Wirth, D. Christen, R. Müller, and G.H. van Lenthe (2008), Bone strength of the human radius: the importance of ultradistal bone, 18th Int. Bone Densitometry Workshop, p. 77. Pugnochiuso, Foggia, Italy, June 15-19.
- Arbenz P., G.H. van Lenthe, R. Müller, A.J. Wirth, C. Bekas, and A. Curioni (2008), Extreme scalability challenges in analyses of human bone structures, Joint Meeting of the 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008). Venice, Italy, June 30 - July 5.
- Christen D., R. Voide, G.H. van Lenthe, S.K. Boyd, and R. Müller (2008), Validation of a novel strain mapping algorithm based on deformable registration of µCT images, 16th Congress of the European Society of Biomechanics, p. S222. Lucerne, Switzerland, July 6-9.
- Mueller T.L., A.J. Wirth, R. Müller, and G.H. van Lenthe (2008), Computational bone mechanics to estimate failure load in the human radius of an elderly population, 16th Congress of the European Society of Biomechanics, p. S 154. Lucerne, Switzerland, July 6-9.
- Tami A.E., M. Baucke, M.M. Pucher, T.L. Mueller, G.H. van Lenthe, R. Müller, P.M. Montavon, and K. Ito (2008), Hydroxyapatite particles maintain peri-implant bone mantel in osteoporotic bone, 16th Congress of the European Society of Biomechanics, p. S 158. Lucerne, Switzerland, July 6-9.
- Torcasio A., H. van Oosterwyck, and G.H. van Lenthe (2008), The systematic errors in tissue modulus of murine bones when estimated from three-point bending, 16th Congress of the European Society of Biomechanics, p. S 14. Lucerne, Switzerland, July 6-9.
- Vanderoost J., S.V.N. Jaecques, G. Van der Perre, S. Boonen, J. D’hooghe, W. Lauriks, and G.H. van Lenthe (2008), Bone stiffness strongly depends on trabecular thickness. A parametric skeleton-based FE study, 16th Congress of the European Society of Biomechanics, p. S 411. Lucerne, Switzerland, July 6-9.
- Wirth A.J., C. Flaig, T.L. Mueller, R. Müller, P. Arbenz, and G.H. van Lenthe (2008), Fast smooth-surface micro-finite element analysis of large-scale bone models, 16th Congress of the European Society of Biomechanics, p. S 100. Lucerne, Switzerland, July 6-9.
- Christen D., R. Voide, G.H. van Lenthe, S.K. Boyd, and R. Müller (2008), A novel strain mapping algorithm for time-lapsed microstructural imaging of bone failure – a validation study, 2008 Annual Meeting, Swiss Society for Biomedical Engineering, p. 27. Muttenz, Switzerland, Sept. 4-5.
- Mueller T.L., D. Christen, A.J. Wirth, B. van Rietbergen, F. Eckstein, R. Müller, and G.H. van Lenthe (2008), Bone strength analysis of the human radius: an investigation on the failure criterion, 2008 Annual Meeting, Swiss Society for Biomedical Engineering, p. 39. Muttenz, Switzerland, Sept. 4-5.
- Mueller T.L., S.E. Basler, R. Müller, and G.H. van Lenthe (2008), Visualization of spinal fractures by image guided failure assessment using HR-pQCT, 2008 Annual Meeting, Swiss Society for Biomedical Engineering, p. 16. Muttenz, Switzerland, Sept. 4-5.
- Ruffoni D., R. Müller, and G.H. van Lenthe (2008), Peri-implant bone architecture affects implant anchorage – A finite element study, 2008 Annual Meeting, Swiss Society for Biomedical Engineering, p. 26. Muttenz, Switzerland, Sept. 4-5.
- Wirth A.J., A. Montero Ortiz, T.L. Mueller, R. Müller, and G.H. van Lenthe (2008), Mechanical analysis of radius epiphyseal bone under physiological loads, 2008 Annual Meeting, Swiss Society for Biomedical Engineering, p. 25. Muttenz, Switzerland, Sept. 4-5.
- Cohen A., R.R. Recker, D.W. Dempster, H. Zhou, A.J. Wirth, T. Kohler, G.H. van Lenthe, R. Müller, J. LeMaster, J.M. Lappe, H.F. Eisenberg, D.J. McMahon, and E. Shane (2008), Marked abnormalities in cortical and trabecular microarchitecture and strength in premenopausal women with idiopathic osteoporosis: A bone biopsy study, 30th Annual Meeting of the American Society for Bone and Mineral Research, p. S51. Montreal, Canada, Sept. 12-16.
- Kirmani S., D. Christen, G.H. van Lenthe, P. Fischer, M.L. Bouxsein, B.L. Riggs, L.J. Melton, S. Amin, R. Müller, and S. Khosla (2008), Microfinite element modeling reveals that transient deficits in cortical bone may underlie the adolescent peak in forearm fractures, 30th Annual Meeting of the American Society for Bone and Mineral Research, p. S451. Montreal, Canada, Sept. 12-16.
- van Lenthe G.H. (2008), Nondestructive imaging of cells and scaffolds, Proceedings of the 3rd Congress on Regenerative Biology and Medicine, p. 44. Stuttgart, Germany, Oct 9-11.
- Goossens L., J. Vanderoost, S.V.N. Jaecques, S. Boonen, J. D’hooge, G.H. van Lenthe, W. Lauriks, and G. Van der Perre (2008), Microstructural simulation of ultrasonic wave propagation through vertebral trabecular bone samples, IEEE International Ultrasonics Symposium p. 90. Beijing, China, November 2-5.
- Vanderoost J., H. Druyts, G.H. van Lenthe, and G. Van der Perre (2008), Cervical vs trochanteric hip fractures: influence of different sexes and failure loads, 2008 IOF World Congress on Osteoporosis, p. S391. Bangkok, Thailand, Dec. 3-7.
- Vanderoost J., H. Druyts, G.H. van Lenthe, and G. Van der Perre (2008), The capacity of BMD and geometric properties to predict hip fracture strength for different sexes and failure locations, 2008 IOF World Congress on Osteoporosis, p. S309. Bangkok, Thailand, Dec. 3-7.
- Vanderoost J., S.V.N. Jaecques, G. Van der Perre, S. Boonen, J. D’hooge, W. Lauriks, and G.H. van Lenthe (2008), The influence of resorption cavities on trabecular bone stiffness, 2008 IOF World Congress on Osteoporosis, p. S236. Bangkok, Thailand, Dec. 3-7.
- van Lenthe G.H. (2009), Nondestructive imaging of cells and scaffolds, 3rd Congress on Regenerative Biology and Medicine (3), p. 682. Stuttgart, Germany, Oct 9-11, 2008.
- Vanderoost J., S.V.N. Jaecques, G. Van der Perre, S. Boonen, J. D’hooge, W. Lauriks, and G.H. van Lenthe (2009), Simulation of resorption cavities in trabecular bone explains strength enhancing effect of antiresorptive agents, 9th European Congress on Clinical and Economic Aspects of Osteoporosis and Osteoarthritis (ECCEO9). p. S67. Athens, Greece, March 18-21.
- Schneider P., R. Voide, M. Stauber, G.H. van Lenthe, M. Stampanoni, and R. Müller (2009), The cortical canal network is a strong predictor for bone microdamage, XIth Congress of the International Society of Bone Morphometry, pp. 30-31. Zell am See, Austria May 28-30.
- Webster D.J., P.L. Morley, G.H. van Lenthe, and R. Müller (2009), Finite element prediction of cortical and trabecular bone remodeling in an in vivo model of bone adaptation, XXII Congress of the International Society of Biomechanics, p. 29. Cape Town, South Africa, July 5-9.
- Vander Sloten J., and G.H. van Lenthe (2009), Towards improved assessment of bone fracture risk, The International School on Robotics and Intelligent Systems (ISRIS). Iasi, Romania, July 22-26.
- Basler S.E., T.L. Mueller, R. Müller, and G.H. van Lenthe (2009), Visualization of implant failure in the femoral head, 2009 Annual Meeting, Swiss Society for Biomedical Engineering, p. 29. Bern, Switzerland, Aug. 27-28.
- Wirth A.J., T.L. Mueller, W. Vereecken, C. Flaig, P. Arbenz, R. Müller, and G.H. van Lenthe (2009), Microstructural finite element analysis accurately predicts primary implant stability, 2009 Annual Meeting, Swiss Society for Biomedical Engineering, p. 28. Bern, Switzerland, Aug. 27-28.
- Christen D., S. Kirmani, G.H. van Lenthe, P.R. Fischer, M.L. Bouxsein, L.K. McCready, L.J. Melton, B.L. Riggs, S. Amin, S. Khosla, and R. Müller (2009), Deficits in cortical bone may cause increased incidence of forearm fractures during adolescence, 2009 Annual Meeting, Swiss Society for Biomedical Engineering, p. 45. Bern, Switzerland, Aug. 27-28.
- Basler S.E., T.L. Mueller, R. Müller, and G.H. van Lenthe (2009), Visualization of bone-implant interactions under compressive loading, Third Switzerland-Japan Workshop on Biomechanics, p. 87. Engelberg, Switzerland, Sept. 1-4.
- Christen D., R. Voide, G.H. van Lenthe, S.K. Boyd, and R. Müller (2009), Strain mapping and deformable image registration to assess loading of the bone microstructure, Third Switzerland-Japan Workshop on Biomechanics, p. 82. Engelberg, Switzerland, Sept. 1-4.
- Ruffoni D., R. Voide, T. Kohler, L.R. Donahue, R. Müller, and G.H. van Lenthe (2009), Assessing the heritability of biomechanical traits in growth hormone deficient inbred mice, Third Switzerland-Japan Workshop on Biomechanics, p. 85. Engelberg, Switzerland, Sept. 1-4.
- Khosla S., D. Christen, B.L. Riggs, S.J. Achenbach, R. Müller, G.H. van Lenthe, S. Amin, E.J. Atkinson, and L.J. Melton (2009), Role of high-resolution peripheral QCT and micro-finite element modeling in assessing forearm fracture risk in postmenopausal women, 31st Annual Meeting of the American Society for Bone and Mineral Research (ASBMR), p. S93. Denver, CO, USA, Sept. 11-15.
- Ruffoni D., R. Voide, T. Kohler, L.R. Donahue, R. Müller, and G.H. van Lenthe (2009), Bone mechanical competence is a highly heritable trait in a mouse model for growth hormone deficiency, 31st Annual Meeting of the American Society for Bone and Mineral Research (ASBMR), p. S175. Denver, CO, USA, Sept. 11-15.
- Schneider P., R. Voide, M. Stauber, G.H. van Lenthe, M. Stampanoni, and R. Müller (2009), Cortical canal morphology highly predicts number of microcracks, 31st Annual Meeting of the American Society for Bone and Mineral Research (ASBMR), p. S377. Denver, CO, USA, Sept. 11-15.
- Vanderoost J., S.V.N. Jaecques, G. Van der Perre, S. Boonen, J. D’hooge, W. Lauriks, and G.H. van Lenthe (2009), Resorption cavity depth explains strength enhancing effect of antiresorptive agents, 31st Annual Meeting of the American Society for Bone and Mineral Research (ASBMR), p. S157. Denver, CO, USA, Sept. 11-15.
- Cohen A., D.W. Dempster, R.R. Recker, H. Zhou, A.J. Wirth, G.H. van Lenthe, T. Kohler, R. Müller, E. Stein, T.L. Nickolas, H. Rogers, J. LeMaster, and E. Shane (2009), Quantitative histomorphometry of transiliac bone biopsies reveals abnormal trabecular microarchitecture in premenopausal women with idiopathic osteoporosis regardless of fracture history, 31st Annual Meeting of the American Society for Bone and Mineral Research (ASBMR), p. S333. Denver, CO, USA, Sept. 11-15.
- Ruffoni D., R. Müller, and G.H. van Lenthe (2009), The role of bone architecture on implant anchorage, Combined meeting of the 4th International Conference on Computational Bioengineering and the 1st European Symposium on Biomedical Integrative Research, p. 156. Bertinoro, Italy, Sept. 16-18.
- Wirth A.J., T.L. Mueller, W. Vereecken, R. Müller, and G.H. van Lenthe (2009), Pullout strength of orthopedic screws can be accurately estimated from a novel in silico technique, Combined meeting of the 4th International Conference on Computational Bioengineering and the 1st European Symposium on Biomedical Integrative Research, p. 149. Bertinoro, Italy, Sept. 16-18.
- Christen D., R. Voide, G.H. van Lenthe, S.K. Boyd, and R. Müller (2009), Strain mapping for time-lapsed microstructural imaging of bone failure – a validation study, Combined meeting of the 4th International Conference on Computational Bioengineering and the 1st European Symposium on Biomedical Integrative Research, p. 45. Bertinoro, Italy, Sept. 16-18.
- Torcasio A., L. Saxon, D. Ruffoni, and G.H. van Lenthe (2009), Development and validation of specimen-specific micro-CT based finite element models of mouse tibiae, Combined meeting of the 4th International Conference on Computational Bioengineering and the 1st European Symposium on Biomedical Integrative Research, p. 70. Bertinoro, Italy, Sept. 16-18.
- Hendrix J., A. Torcasio, P. Verschueren, G. Van der Perre, and G.H. van Lenthe (2009), Quantification of cranial bone tissue modulus, 8th Belgian Day on Biomedical Engineering, p. 44. Brussels, Belgium, Dec. 4.
- Knippels I., A.J. Wirth, T.L. Mueller, R. Müller, and G.H. van Lenthe (2009), Strength predictions of the human distal radius are affected by bone size and load application, 8th Belgian Day on Biomedical Engineering, p. 43. Brussels, Belgium, Dec. 4.
- Basler S.E., T.L. Mueller, D. Christen, A.J. Wirth, R. Müller, and G.H. van Lenthe (2010), Towards validation of computational analyses of peri-implant strains: a feasibility study using experimentally obtained strain maps, 18th Annual Meeting on Computational Methods in Orthopaedic Biomechanics, p. 21. New Orleans, USA, March 5.
- Ruffoni D., R. Voide, T. Kohler, L.R. Donahue, R. Müller, and G.H. van Lenthe (2010), Bone mechanical competence is a highly heritable trait in a mouse model for growth hormone deficiency, IOF World Congress on Osteoporosis & 10th European Congress on Clinical and Economic Aspects of Osteoporosis and Osteoarthritis, p. S 289. Florence, Italy, May 5-8.
- Jones D.B., C. Kasseck, M. Kratz, A. Torcasio, N.C. Gerhardt, G.H. van Lenthe, T. Gambichler, K. Hoffmann, and M.R. Hofmann (2010), Comparison of optical coherence tomography, micro computed tomography and histology at a three- dimensionally imaged bone 7th International Workshop on Musculoskeletal and Neuronal Interactions, pp. O-14. Cologne, Germany, May 20-23.
- Wirth A.J., R. Müller, and G.H. van Lenthe (2010), Implant stability is affected by peri-implant bone microstructure, 18th Annual Meeting of the European Orthopedic Research Society. Davos, Switzerland, June 30-July 2.
- Basler S.E., T.L. Mueller, R. Müller, and G.H. van Lenthe (2010), Primary implant loosening is caused by bone failure in close proximity of the bone-implant interface, 17th Congress of the European Society of Biomechanics. Edinburgh, United Kingdom, July 5-8.
- Hendrix J., A. Torcasio, P. Verschueren, G. Van der Perre, and G.H. van Lenthe (2010), Determination of the cranial bone tissue modulus using μFE analysis, 17th Congress of the European Society of Biomechanics. Edinburgh, United Kingdom, July 5-8.
- Knippels I., A.J. Wirth, T.L. Mueller, F. Eckstein, R. Müller, and G.H. van Lenthe (2010), Can strength predictions of the human distal radius be improved by simulating more realistic fall-loading characteristics?, 17th Congress of the European Society of Biomechanics. Edinburgh, United Kingdom, July 5-8.
- Lenaerts L., I. Knippels, L.J. Melton, S. Khosla, and G.H. van Lenthe (2010), Determining local anisotropy in clinical CT images using a new orientation detection method: Grey Level Deviation (GLD), 17th Congress of the European Society of Biomechanics. Edinburgh, United Kingdom, July 5-8.
- Ruffoni D., J.A. Steiner, A.J. Wirth, R. Müller, and G.H. van Lenthe (2010), Quantifying the contribution of cortical and trabecular bone for implant anchorage - a micro-structural finite element study in human vertebral bone, 17th Congress of the European Society of Biomechanics. Edinburgh, United Kingdom, July 5-8.
- Schneider P., R. Voide, M. Stauber, G.H. van Lenthe, M. Stampanoni, and R. Müller (2010), The importance of bone ultrastructure for microdamage accumulation, 17th Congress of the European Society of Biomechanics. Edinburgh, United Kingdom, July 5-8.
- Torcasio A., X. Zhang, J. Duyck, and G.H. van Lenthe (2010), Quantification of the peri-implant bone strains in the rat tibia compression model, 17th Congress of the European Society of Biomechanics. Edinburgh, United Kingdom, July 5-8.
- Vanderoost J., K. Søe, J.M. Delaissé, and G.H. van Lenthe (2010), Direct effect of glucocorticoids on osteoclasts: simulation of mechanical consequences, 17th Congress of the European Society of Biomechanics. Edinburgh, United Kingdom, July 5-8.
- Wirth A.J., R. Müller, and G.H. van Lenthe (2010), Peri-implant bone microarchitecture strongly affects implant stability, 17th Congress of the European Society of Biomechanics. Edinburgh, United Kingdom, July 5-8.
- Mader K., P. Schneider, D. Ruffoni, G.H. van Lenthe, J.-P. Thiran, R. Müller, and M. Stampanoni (2010), Automated, high-throughput, multi-scale assessment of bone morphology and bone competence, 6th World Congress on Biomechanics, p. 399. Singapore, Aug. 1-6.
- Tawackoli W., G. Pelled, I. Kallai, D. Ruffoni, Y. Zilberman, G.H. van Lenthe, and D. Gazit (2010), CT imaging and finite element analysis of nonunion fracture repaired by genetically engineered mesenchymal stem cells, 2010 World Molecular Imaging Congress, p. Pres. 120. Kyoto, Japan, Sept. 8-11.
- Wirth A.J., R. Müller, and G.H. van Lenthe (2010), Peri-implant bone microarchitecture influences implant stability, 12th Biennial Conference of the Int. Society for Fracture Repair, p. 69. London, United Kingdom, Sept 26-28.
- Mueller T.L., S.E. Basler, R. Müller, and G.H. van Lenthe (2010), Visualization of peri-implant trabecular bone during failure in human femoral heads, 12th Biennial Conference of the Int. Society for Fracture Repair, p. 41. London, United Kingdom, Sept. 26-28.
- van Lenthe G.H. (2010), Biomechanical imaging: relating bone structure to function, Symposium on High Resolution X-Ray Imaging, p. 14. Grasemere, United Kingdom, Oct 11-14.
- van Lenthe G.H. (2011), Hierarchical imaging of bone structure and function, Micro-CT and nano-CT for the hierarchical analysis of materials, p. 5. Leuven, Belgium, May 24.
- Truscello S., G. Kerckhofs, M. Moesen, A. Torcasio, S. Van Bael, G.H. van Lenthe, J. Schrooten, and H. Van Oosterwyck (2011), A computational solid and fluid mechanical analysis of CAD- versus micro-CT-based models of regularTi6Al4V scaffolds for bone tissue engineering, Annual meeting of the European Chapter of the Tissue Engineering and Regenerative Medicine International Society (TERMIS-EU 2011). Granada, Spain, June 7.
- Steiner J.A., C. Wenger, T.L. Mueller, D. Ruffoni, R. Müller, and G.H. van Lenthe (2011), Mechanical competence of implants in trabecular bone before and after augmentation, 2011 Annual Meeting, Swiss Society for Biomedical Engineering, p. 10. Bern, Switzerland, Aug. 22.
- Abdel Jaber S., S.E. Basler, D. Ruffoni, R. Cotton, R. Müller, and G.H. van Lenthe (2011), Experiment-based non-linear finite element analysis of the bone-implant interface, 2011 Annual Meeting, Swiss Society for Biomedical Engineering, p. 34. Bern, Switzerland, Aug. 22.
- Basler S.E., J.A. Steiner, A. Santoro, R. Müller, and G.H. van Lenthe (2011), Image-guided failure assessment reveals complex failure modes in augmented bone-implant systems, 2011 Annual Meeting, Swiss Society for Biomedical Engineering, p. 14. Bern, Switzerland, Aug. 22.
- Traxler J., S.E. Basler, R. Müller, and G.H. van Lenthe (2011), Peri-implant bone microstructure determines dynamic implant cut-out, 2011 Annual Meeting, Swiss Society for Biomedical Engineering, p. 33. Bern, Switzerland, Aug. 22.
- Knippels I., L.J. Melton, S. Amin, S. Boonen, S. Khosla, and G.H. van Lenthe (2011), Non-invasive quantification of changes in bone micro-architecture and strength: three year follow-up at the distal radius, 33rd Annual Meeting of the American Society for Bone and Mineral Research (ASBMR), p. S258. San Diego, CA, USA, Sept. 16-20.
- Cohen A., E. Stein, D.W. Dempster, H. Zhou, S. Cremers, C.J. Rosen, T.L. Nickolas, T. Kohler, A.J. Wirth, G.H. van Lenthe, R. Müller, P. Chen, R.R. Recker, J. Lappe, and E. Shane (2011), Idiopathic osteoporosis in premenopausal women: relationships between bone turnover and pathogenesis, 33rd Annual Meeting of the American Society for Bone and Mineral Research (ASBMR), p. S495. San Diego, CA, USA, Sept. 16-20.
- Vanderoost J., K. Søe, D.M.H. Merrild, J.M. Delaissé, and G.H. van Lenthe (2011), Bone quality is negatively affected by glucocorticoid-induced changes in the geometry of osteoclast resorption cavities, 33rd Annual Meeting of the American Society for Bone and Mineral Research (ASBMR), p. S356. San Diego, CA, USA, Sept. 16-20.
- Corten K., F. Jonkergouw, W. Bartels, G.H. van Lenthe, J. Bellemans, J.-P. Simon, and J. Vander Sloten (2011), Bowing of the femur: a new reference plane for axial alignment of total knee replacements, Annual Congress of International Society for Technology in Arthroplasty. Bruges, Belgium, Sept 20-23.
- Pérez M.A., G.H. van Lenthe, R. Wirix-Speetjens, and J.M. García-Aznar (2012), Patient-specific simulations of human bones: CT data and bone remodeling models, Proceedings of the Materialise World Conference 2012, p. 41. Leuven, Belgium, April 18-20.
- Basler S.E., J. Traxler, R. Müller, and G.H. van Lenthe (2012), Importance of peri-implant bone microstructure in dynamic implant cut-out, 18th Congress of the European Society of Biomechanics, p. S320. Lisbon, Portugal, July 1-4.
- Christen P., B. van Rietbergen, I. Knippels, R. Müller, G.H. van Lenthe, and K. Ito (2012), Determination of physiological loading conditions at the human distal radius, 18th Congress of the European Society of Biomechanics, p. S100. Lisbon, Portugal, July 1-4.
- Lenaerts L., S. Verschueren, A. Bogaerts, S. Boonen, C. Delecluse, K. Fritscher, and G.H. van Lenthe (2012), Quantification of training effects on femoral bone quality using patient-specific FE analysis, 18th Congress of the European Society of Biomechanics, p. S542. Lisbon, Portugal, July 1-4.
- Li Z., G. Kuhn, M. von Salis-Soglio, C. Weigt, R. Matthys, G.H. van Lenthe, R. Müller, and D. Ruffoni (2012), Three-dimensional in vivo monitoring of bone response to implant insertion, 18th Congress of the European Society of Biomechanics, p. S341. Lisbon, Portugal, July 1-4.
- Steiner J.A., C. Wenger, T.L. Mueller, D. Ruffoni, R. Müller, and G.H. van Lenthe (2012), In silico quantification of the elastic and failure properties of bone screws in trabecular bone, 18th Congress of the European Society of Biomechanics, p. S340. Lisbon, Portugal, July 1-4.
- Torcasio A., K. Jähn, M. Van Guyse, P. Spaepen, A.E. Tami, J. Vander Sloten, D.B. Jones, M.J. Stoddart, and G.H. van Lenthe (2012), Trabecular bone adaptation to low-magnitude high-frequency loading at micro-gravity, 18th Congress of the European Society of Biomechanics, p. S531. Lisbon, Portugal, July 1-4.
- van Lenthe G.H. (2012), Bone microstructural quality affects implant stability, Structure-Property Relationships in Hierarchical Biocomposites, p. 13. Lausanne, Switzerland, July 16-18.
- van Lenthe G.H. (2012), Computational analyses of bone competence and implant stability, Mathematics of Medical Devices and Surgical Procedures, pp. 14-15. London, UK, Sept. 17-19.
- Basler S.E., J.A. Steiner, D. Christen, R. Müller, and G.H. van Lenthe (2012), Augmented bone-implant constructs fail by shearing of the cement-screw interface: experimental and computational micromechanics, 20th Annual Meeting of the European Orthopaedic Research Society, pp. CD-ROM, 2A2. Amsterdam, the Netherlands, Sept. 26 - 28
- Bhattacharya P., A.-K. Braeken, M. Laurent, D. Vanderschueren, and G.H. van Lenthe (2013), Site-specific differences in mouse cortical bone toughness are under genetic control, 19th Conference of the European Society of Biomechanics. Patras, Greece, August 25-28.
- Steiner J.A., S.J. Ferguson, A. Weber, and G.H. van Lenthe (2013), Verbesserung der Implantatfixierung im osteoporotischen Knochen mittels hochauflösender Computertomographie der Knochenstruktur und darauf basierender Mikro-Finite Elemente Computersimulation, CTI Medtech Event 2013, p. 55. Bern, Switzerland, Aug. 27.
- Steiner J.A., S.J. Ferguson, and G.H. van Lenthe (2013), Screw insertion has a negative impact on peri-implant bone quality, 5th International Conference on Computational Bioengineering, p. CD #152. Leuven, Belgium, Sept. 11-13.
- Garijo N., S. Walscharts, M.A. Pérez, L. Vigneron, J. Vander Sloten, G.H. van Lenthe, and J.M. García-Aznar (2013), Towards the creation of patient-specific bone remodeling models, 5th International Conference on Computational Bioengineering, pp. CD, #223. Leuven, Belgium, Sept. 11-13.
- Li Z., G. Kuhn, M. von Salis-Soglio, S. Cooke, M. Schirmer, G.H. van Lenthe, R. Müller, and D. Ruffoni (2013), Time-lapsed in vivo monitoring of peri-implant bone remodeling in a mouse model, 5th International Conference on Computational Bioengineering, pp. CD, #225. Leuven, Belgium, Sept. 11-13.
- Bhattacharya P., A.-K. Braeken, M. Laurent, D. Vanderschueren, S. Boonen, and G.H. van Lenthe (2013), Tissue-scale bone mechanical behavior in young c3h and b6 mice is site- and strain-specific., 35th Annual Meeting of the American Society for Bone and Mineral Research (ASBMR). Baltimore, MD, USA, Oct. 4-7.
- Steiner J.A., G.H. van Lenthe, S.J. Ferguson, and J.M. Favre (2013), In-silico modeling for fracture fixation in osteoporotic bone, Supercomputing Conference 2013 (SC13), p. 89. Denver, CO, USA, Nov. 17-22.
- Innocenti B., Ö.F. Bilgen, L. Labey, G.H. van Lenthe, J. Vander Sloten, and F. Catani (2014), Effect of overstuffing and understuffing in unicompartmental knee arthroplasty. A validated finite element analysis, 2014 Annual Meeting of the American Academy of Orthopaedic Surgeons, pp. CD, paper 182. New Orleans, LA, USA, March 11-15.
- Pellikaan P., A. Vahdati, R. Wirix-Speetjens, F. Sinnaeve, I. Samson, G.H. van Lenthe, and J. Vander Sloten (2014), Prediction of bone density distribution around the compress® implant: effect of idealized versus subject-specific geometry, 7th World Congress of Biomechanics, p. R186 (CD). Boston, USA, July 6-11.
- Steiner J.A., S.J. Ferguson, and G.H. van Lenthe (2014), Towards an accurate computational description of the bone-implant interface, 7th World Congress of Biomechanics, p. F64 (CD). Boston, USA, July 6-11.
- Vahdati A., J. Vander Sloten, and G.H. van Lenthe (2014), An inverse finite element procedure for subject-specific prediction of bone density distribution in the proximal femur, 7th World Congress of Biomechanics, p. M170 (CD). Boston, USA, July 6-11.
- van Lenthe G.H. (2014), Trabecular bone microstructure affects screw stability: experimental and computational quantification, 7th World Congress of Biomechanics, pp. 20-15 (CD). Boston, USA, July 6-11.
- van Lenthe G.H. (2014), The contribution of bone microstructure to bone organ level mechanical quality, 7th World Congress of Biomechanics, p. 19-15 (CD). Boston, USA, July 6-11.
- Steiner J.A., S.J. Ferguson, and G.H. van Lenthe (2014), Failure of screws in human trabecular bone replicated by micro-CT based finite element models, 2014 Annual Meeting, Swiss Society for Biomedical Engineering. Zurich, Switzerland, Aug. 27-28.
- Steiner J.A., S.J. Ferguson, A. Weber, and G.H. van Lenthe (2014), Improved fixation of implants in osteoporotic bone derived from bone microstructural based finite element computer simulation, CTI Medtech Event 2014, P55. Bern, Switzerland, Sept. 2.
- Steiner J.A., S.J. Ferguson, and G.H. van Lenthe (2014), Microstructural models can accurately replicate failure of screw fixation in human trabecular bone, 12th Intl. Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), p. 82. Amsterdam, the Netherlands, Oct. 13-15.
- Garijo N., A. Vahdati, G.H. van Lenthe, J.M. García-Aznar, and M.A. Pérez (2014), Numerical algorithms for patient-specific predictions of proximal femoral loads, 12th Intl. Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), p. 41. Amsterdam, the Netherlands, Oct. 13-15.
- Pellikaan P., R. Wirix-Speetjens, F. Sinnaeve, I. Jonkers, G.H. van Lenthe, and J. Vander Sloten (2014), Effect of idealized versus subject-specific geometry and loading conditions on the bone density distribution around the Compress® implant, 12th Intl. Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE), p. 70. Amsterdam, the Netherlands, Oct. 13-15.
- Quirynen T., G.H. van Lenthe, and J. Vander Sloten (2014), Do small interprosthetic gaps increase bone fracture risk?, 13th Belgian National Day on Biomedical Engineering. Brussels, Belgium, Nov. 28.
- Steiner J.A., S.J. Ferguson, and G.H. van Lenthe (2015), Bone morphometric parameters accurately predict the apparent mechanical properties of damaged peri-implant bone, 23rd Annual Meeting on Computational Methods in Orthopaedic Biomechanics. Las Vegas, Nevada, USA, March 27.
-
Hemmatian H., M.R. Laurent, F. Claessens, D. Vanderschueren, and
G.H. van Lenthe (2015), Variation in osteocyte lacunar size and shape in rapidly forming cortical bone due to mechanical loading,
4th Joint Meeting of the European Calcified Tissue Society (ECTS) and the International Bone and Mineral Society (IBMS), p. 223. Rotterdam, the Netherlands, April 25-28
http://dx.doi.org/10.1038/bonekey.2015.40
-
Sweedy A., M. Bohner, G.H. van Lenthe, and G. Baroud (2015), Segmenting μCT data of in vivo β-TCP scaffolds using active contours algorithm, The 25th Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmentation Procedures (GRIBOI), P3. Toronto, Canada, May 18-20.
- Sweedy A., M. Bohner, G.H. van Lenthe, and G. Baroud (2015), Validation of segmentation and alignment algorithm for μCT data of bone substitutes, The 25th Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmentation Procedures (GRIBOI), P4. Toronto, Canada, May 18-20.
-
Sweedy A., S. Jerban, M. Bohner, G.H. van Lenthe, and G. Baroud (2015), Detection of bosonic phase in β-TCP scaffolds based on μCT data, The 25th Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmentation Procedures (GRIBOI), P5. Toronto, Canada, May 18-20.
- Sweedy A., S. Jerban, M. Bohner, G.H. van Lenthe, and G. Baroud (2015), Refining algorithm to better segment edges in low-resolutions scans of resorbable substitutes, The 25th Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmentation Procedures (GRIBOI), P6. Toronto, Canada, May 18-20.
- Sweedy A., S. Jerban, M. Bohner, G.H. van Lenthe, and G. Baroud (2015), Edge-preserving anisotropic diffusion versus Gaussian filtering for noise reduction in medical images, The 25th Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmentation Procedures (GRIBOI), P7. Toronto, Canada, May 18-20.
- Sweedy A., M. Bohner, G.H. van Lenthe, S. Becker, and G. Baroud (2015), Pre- and post-implantation alignment of μCT data of β-TCP scaffolds, The 25th Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmentation Procedures (GRIBOI), P9. Toronto, Canada, May 18-20.
-
Dourthe B., F.D. Kerkhof, F. Stockmans, G.H. van Lenthe, and E.E. Vereecke (2015), Contact patterns in the trapeziometacarpal joint during isometric tasks obtained via mathematical modeling, 21st Congress of the European Society of Biomechanics. Prague, Czech Republic, July 5-8.
-
Steiner J.A., S.J. Ferguson, and G.H. van Lenthe (2015), How to replicate the mechanical behavior of bone-implant systems using micro-CT based finite element analyses, 21st Congress of the European Society of Biomechanics. Prague, Czech Republic, July 5-8.
- Pellikaan P., G. Giarmatzis, S. Verschueren, G.H. van Lenthe, I. Jonkers, and J. Vander Sloten (2015), Influence of loading conditions on the bone density predictions using the generic musculoskeletal geometry, 13th Intl. Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE). Montreal, Canada, Sept 1-5.
- Mys K., E.E. Vereecke, F. Stockmans, and G.H. van Lenthe (2015), Scatter correction can enhance contrast in high-resolution Cone-Beam Computed Tomography images, 6th International Conference on Computational Bioengineering. Barcelona, Spain, Sept. 14-16.
- Mys K., E.E. Vereecke, F. Stockmans, and G.H. van Lenthe (2015), Artefact correction of high-resolution Cone-Beam Computed Tomography images improves the visualization of bone microstructure, Joint Meeting of the Belgische Vereniging voor Orthopedie en Traumatologie (BVOT) & Belgian Bone Club (BBC). Brussels, Belgium, Nov 14.
- Mys K., E.E. Vereecke, F. Stockmans, and G.H. van Lenthe (2016), Artefact correction improves visualization of cone-beam computed tomography images 14th Belgian National day on Biomedical Engineering. Brussels, Belgium, March 4.
-
Quirynen T., J. Vander Sloten, and G.H. van Lenthe (2016), Ipsilateral hip and knee implants do not increase bone fracture risk: a computational study, 14th Belgian National day on Biomedical Engineering. Brussels, Belgium, March 4.
-
Van Dessel J., L.F.P. Nicolielo, O. El Mahraoui, G.H. van Lenthe, and R. Jacobs (2016), Accuracy of three-dimensional finite element modeling for trabecular and cortical bone using CBCT, European Congress of DentoMaxilloFacial Radiology. Cardiff, Wales, UK, June 15-18.
-
Steiner J.A., P. Christen, S.J. Ferguson, and G.H. van Lenthe (2016), Towards a patient-specific in silico model to accurately quantify implant primary stability in osteoporotic bone, 22nd Congress of the European Society of Biomechanics. Lyon, France, July 10-13. OS10-3
-
Hemmatian H., M. Laurent, F. Claessens, Vanderschueren D., and G.H. van Lenthe (2016), Age-related changes in the 3D microstructural mouse cortical bone using high resolution desktop micro-CT system, 38th Annual Meeting of the American Society for Bone and Mineral Research (ASBMR). Atlanta, Georgia, USA, Sept. 16-19.
-
Mehigan T., A. Joy, P. Cantillon-Murphy, L. Burgoyne, C. Murphy, X. Canals-Riera, E. Marsa, R. Cosgrave,
G.H. van Lenthe, S. O'Flynn, G. Shorten, and C. O'Tuathaigh (2016), Educating for innovation and standards in medical device design using novel online tools,
9th International Conference of Education, Research And Innovation (ICERI). Seville, Spain, Nov. 14-16,
http://dx.doi.org/10.21125/iceri.2016.1535.
-
Hemmatian H., M. Laurent, F. Claessens, D. Vanderschueren, and G.H. van Lenthe (2016), Ageing is leading to alterations in murine cortical bone microporosity, 15th Belgian National Day on Biomedical Engineering. Brussels, Belgium, Nov. 25, p.21.
-
Mys K., F. Stockmans, E.E. Vereecke, and G.H. van Lenthe (2016), Cone-beam computed tomography can quantify bone microstructure for orthopaedic purposes, 15th Belgian National Day on Biomedical Engineering. Brussels, Belgium, Nov. 25, p. 45.
-
Dourthe B., P. D’Agostino, F.D. Kerkhof, G.H. van Lenthe, F. Stockmans, and E.E. Vereecke (2017), Comparison between intra-articular contact patterns in the trapeziometacarpal joint of healthy and arthritic subjects, 2017 Osteoarthritis Research Society International (OARSI) World Congress. Las Vegas, USA, Apr. 27-30.
-
Mys K., F. Stockmans, E.E. Vereecke, and G.H. van Lenthe (2017), Quantification of bone microstructure using Cone-Beam Computed Tomography, Combined meeting of the 21st International Bone Densitometry Workshop (IBDW) and the 7th European Symposium on Ultrasonic Characterization of Bone (ESUCB). Bad Staffelstein, Germany, June 26-30.
-
Pellikaan P., Z. Asgharpour, I. Jonkers, G.H. van Lenthe, and J. Vander Sloten (2017), Effects of subject-specific geometry, bone density and loading conditions on the strains at the femur neck, Combined meeting of the 21st International Bone Densitometry Workshop (IBDW) and the 7th European Symposium on Ultrasonic Characterization of Bone (ESUCB). Bad Staffelstein, Germany, June 26-30.
-
Asgharpour Z., A. Sas, P. Pellikaan, S. Kolk, G.H. van Lenthe, E. de Winter, and T. Scheerlinck (2017), Evaluation of implant positioning during total hip arthroplasty (THA) in a structured and automated workflow, 23rd Congress of the European Society of Biomechanics. Seville, Spain, July 2-5.
-
Pellikaan P., G. Giarmatzis, I. Jonkers, S. Verschueren, G.H. van Lenthe, and J. Vander Sloten (2017), Effect of the Hounsfield-density and density-elasticity relationships on the strains at the femur neck, 23rd Congress of the European Society of Biomechanics. Seville, Spain, July 2-5.
-
Sas A., S. Kolk, P. Pellikaan, T. Scheerlinck, and G.H. van Lenthe (2017), Effect of anatomical variation of the proximal femur on stress shielding induced by a calcar guided short stem: an automated finite element analysis study, 30th Annual meeting of the International Society for Technology in Arthroplasty (ISTA). Seoul, Korea, Sept 20-23.
-
Hemmatian H., R. Jalali, C.M. Semeins, G.H. van Lenthe, J. Klein-Nulend, and A.D. Bakker (2017), The effect of lacunar shape on the osteocyte mechanoresponse, 27th Annual Meeting of the Nederlandse Vereniging voor Calcium- en Botstofwisseling (NVCB). Zeist, the Netherlands, Nov. 8-9.
-
Pellikaan P., R. Wirix-Speetjens, I. Jonkers, G.H. van Lenthe, and J. Vander Sloten (2018), Added value of case-specific, computer aided biomechanical analysis, 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 3rd Conference on Imaging and Visualization. Lisbon, Portugal, March 26-29
-
Dourthe B., R. Nickmanesh, D.R. Wilson, P. Agostino, A.N. Patwa, M.W. Grinstaff, B.D. Snyder, F. Kerkhof, G.H. van Lenthe, and E.E. Vereecke (2018), Correlation between thumb cartilage properties and medical imaging, 8th World Congress of Biomechanics, P1069. Dublin, Ireland, July 8-12.
-
Dourthe B., F.J. Valero-Cuevas, G.H. van Lenthe, P. D'Agostino, F. Kerkhof, and E.E. Vereecke (2018), First steps towards the forward modeling of the thumb joint, 8th World Congress of Biomechanics, P1070. Dublin, Ireland, July 8-12.
-
Hemmatian H., A.D. Bakker, J. Klein-Nulend, and G.H. van Lenthe (2018), Age-related changes in osteocyte lacunar morphology cause strain differences in the bone matrix, 8th World Congress of Biomechanics, P4355. Dublin, Ireland, July 8-12.
-
Marin C., G. Papantonakis, K. Sels, G.H. van Lenthe, G. Falgayrac, R. Vangoitsenhoven, B. Van der Schueren, G. Penel, F.P. Luyten, K. Vandamme, and G. Kerckhofs (2018), Macro-architectural alterations and accumulation of advanced glycation end-products compromise the biomechanical performance of T2DM- and RYGB-bone in C57Bl/6 mice, 8th World Congress of Biomechanics, O1399. Dublin, Ireland, July 8-12.
-
Mys K., P. Varga, B. Gueorguiev, F. Stockmans, and G.H. van Lenthe (2018), Cone-beam computed tomography can quantify trapezium bone microstructure and stiffness as good as high-resolution peripheral quantitative computed tomography, 8th World Congress of Biomechanics, P1284. Dublin, Ireland, July 8-12.
-
Sas A., P. Marty, P. Pellikaan, S. Kolk, T. Scheerlinck, and G.H. van Lenthe (2018), Implant position of a calcar-guided short stem affects stress shielding of the proximal femur, 8th World Congress of Biomechanics, O1058. Dublin, Ireland, July 8-12.
-
Taylan O., G. Peersman, J. Slane, B. Vanthienen, G.H. van Lenthe, T.J. Heyse, and L. Scheys (2018), Dynamic, in-vitro analysis of tibial bone strains in a fixed versus mobile bearing design for unicompartmental knee replacement, 8th World Congress of Biomechanics, O0368. Dublin, Ireland, July 8-12.
-
Van Hees S., K. Mys, F. Stockmans, and G.H. van Lenthe (2018), Sensitivity analysis for the design of a finite element model of the wrist joint, 8th World Congress of Biomechanics, O0962. Dublin, Ireland, July 8-12.
-
Hilvert M., P. Vanden Berghe, R. Wirix-Speetjens, G.H. van Lenthe, and M.J. Gómez-Benito (2018), Optimizing material and design specifications of bioresorbable CMF plates using an in-silico model of a 4-point bending test, Virtual Physiological Human Conference (VPH2018). Zaragoza, Spain, Sept. 5-7.
-
Pitocchi J., P. Vanden Berghe, M.A. Pérez, G.H. van Lenthe, and R. Wirix-Speetjens (2018), Integration of cortical thickness data in a statistical shape model of the scapula, Virtual Physiological Human Conference (VPH2018). Zaragoza, Spain, Sept. 5-7.
-
Heyse T.J., G. Peersman, O. Taylan, J. Slane, B. Vanthienen, G.H. van Lenthe, and L. Scheys (2018), Mobile bearing leads to less proximal medial tibial strain following UKA in comparison with fixed bearing in a cadaver setup, Deutscher Kongress für Orthopädie und Unfallchirurgie (DKOU). Berlin, Germany, Oct. 23-26.
-
Mys K., P. Varga, F. Stockmans, B. Gueorguiev, C.E. Wyers, J.P. van den Bergh, and G.H. van Lenthe (2019), Cone-beam computed tomography as a fast alternative for high-resolution peripheral computed tomography, 22nd International Workshop on Quantitative Musculoskeletal Imaging (QMSKI). Lake Louise, Canada, Feb. 24 - Mar. 1.
-
Mys K., P. Varga, F. Stockmans, B. Gueorguiev, C.E. Wyers, J.P. van den Bergh, and G.H. van Lenthe (2019), Influence of the analysis software to calculate direct bone structural parameters, 22nd International Workshop on Quantitative Musculoskeletal Imaging (QMSKI). Lake Louise, Canada, Feb. 24 - Mar. 1.
-
Mys K., G. Zhang, F. Stockmans, C.E. Wyers, J.P. van den Bergh, and G.H. van Lenthe (2019), X-ray scattering is limited in cone-beam computed tomography of extremities, 22nd International Workshop on Quantitative Musculoskeletal Imaging (QMSKI). Lake Louise, Canada, Feb. 24 - Mar. 1.
-
Mys K., P. Varga, F. Stockmans, B. Gueorguiev, V. Neumann, O. Vanovermeire, C.E. Wyers, J.P. van den Bergh, and G.H. van Lenthe (2019), Cone-beam CT as a fast and promising technique to assess the microstructure of distal radii in clinical practice, 25th Congress of the European Society of Biomechanics (ESB 2019). Vienna, Austria, July 7-10.
-
Tits A., J.-F. Kaux, J. Fernandez, P. Drion, G.H. van Lenthe, and D. Ruffoni (2019), Structural and mechanical analysis of calcaneus bone at the Achilles tendon insertion site, 25th Congress of the European Society of Biomechanics (ESB 2019). Vienna, Austria, July 7-10.
-
Hilvert M., G.H. van Lenthe, M. Wesseling, R. Wirix-Speetjens, and M.J. Gómez-Benito (2019), Bone healing simulation in the mandible after orthognathic surgery, 16th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE). New York, USA, Aug 14-16.
-
Pitocchi J., R. Wirix-Speetjens, G.H. van Lenthe, and M.A. Perez-Anson (2019), Measuring tightening torque and force of nonlocking screws for reverse shoulder prosthesis, 32nd Annual Congress of the International Society for Technology in Arthroplasty (ISTA 2019). Toronto, Canada, Oct. 2-5.
-
Heyse T., O. Taylan, J. Slane, G.H. van Lenthe, G. Peersman, and L. Scheys (2019), Mobile bearing leads to less proximal medial tibial strain following UKA in comparison with fixed bearing in a cadaver setup, 8. Jahreskongress der Deutschen Kniegesellschaft. Hamburg, Germany, Nov. 22-23.
- van Leeuwen, T., M.T. Schneider, G.H. van Lenthe, and E.E. Vereecke (2020). An integrated (micro) finite element approach to analyze force distributions in the primate thumb during functional grasps." 89th annual meeting of the American Association of Physical Anthropologists (AAPA), Los Angeles, April 15-18. Published in American Journal of Physical Anthropology, 171 (S69): 293.
- Kahmann S.L., A. Sas, J. Knifka, J. Borggrefe, G.H. van Lenthe, and K. Wegmann (2020), A computational-experimental model of the elbow, VPH 2020. Paris, France (online), August 26-28.
- Mys K., P. Varga, and G.H. van Lenthe (2020), Adaptive local thresholding improves the accuracy of XtremeCT to quantify trabecular structure in the radius, 28th Annual Congress of the European Orthopaedic Research Society. Online Sept 17-18.
- Sas A., A. Sermon, and G.H. van Lenthe (2020), Finite element models can aid in identifying suitable patients for femoroplasty of metastatic lesions, 28th Annual Meeting of the European Orthopaedic Research Society. Online, Sept. 17-18.
- Tits A., P. Varga, J.F. Kaux, E. Plougonven, J. Fernandez, P. Drion, G.H. van Lenthe, and D. Ruffoni (2020), Local adaptation of bone micro-structure and canal network to tendon insertion investigated by image-based micro-FE simulations, Bone Reports 13, Suppl.: 100393. Proceedings of the 47th Meeting of the European Calcified Tissue Society (ECTS 2020).
http://dx.doi.org/10.1016/j.bonr.2020.100393
- Azari F., A. Sas, K.P. Kutzner, A. Klockow, T. Scheerlinck, and G.H. van Lenthe (2021), Cemented short-stem total hip arthroplasty appears promising in patients with poor bone quality, 26th Congress of the European Society of Biomechanics (ESB 2021). Milan, Italy (online), July 11-14, p. 1436.
- Einafshar M., A. Hashemi, and G.H. van Lenthe (2021), Can Periotest® quantify spinal pedicle screw stability in agreement with pull-out test and acoustic modal analysis?, 26th Congress of the European Society of Biomechanics (ESB 2021). Milan, Italy (online), July 11-14, p. 1337.
- Einafshar M., A. Hashemi, and G.H. van Lenthe (2021), The role of interface stresses on implant stability. An experimental-computational approach, 26th Congress of the European Society of Biomechanics (ESB 2021). Milan, Italy (online), July 11-14, p. 1336.
- Meynen A., F. Vanquickenborne, S. Bartholomeeusen, G.H. van Lenthe, and L. Scheys (2021), Biomechanics of structural allograft impaction in high tibial osteotomy: a finite element study, 26th Congress of the European Society of Biomechanics (ESB 2021). Milan, Italy (online), July 11-14, p. 1250.
- Mys K., F. Stockmans, B. Gueorguiev, V. Neumann, C.E. Wyers, J.P. van den Bergh, G.H. van Lenthe, and P. Varga (2021), Trabecular microstructure can be quantified with xtremect more accurately using adaptive thresholding, 26th Congress of the European Society of Biomechanics (ESB 2021). Milan, Italy (online), July 11-14, p. 1579.
- Sas A., H. Wafa, E. Tanck, A. Sermon, and G.H. van Lenthe (2021), Can femoroplasty reduce fracture risk in cancer patients with femoral bone metastases?, 26th Congress of the European Society of Biomechanics (ESB 2021). Milan, Italy (online), July 11-14, p. 1260.
- Tits A., S. Blouin, J.-F. Kaux, P. Drion, G.H. van Lenthe, R. Weinkamer, M. Hartmann, and D. Ruffoni (2021), Microstructural anisotropy and material gradients in mineralized fibrocartilage at the tendon-bone insertion, 26th Congress of the European Society of Biomechanics (ESB 2021). Milan, Italy (online), July 11-14, p. 1390.
- Hemmatian H., A.D. Bakker, J. Klein-Nulend, and G.H. van Lenthe (2021), Variations in the osteocyte lacuna morphology result in a nonuniform local bone tissue strain distribution, 17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 5th Conference on Imaging and Visualization (CMBBE 2021). Bonn, Germany (online), Sept. 7-9.
- Colyn W., F. Azari, J. Bellemans, G.H. van Lenthe, and L. Scheys (2022), Microstructural adaptations of the subchondral tibial bone are related to the mechanical axis deviation in end-stage varus osteoarthritic knees, 2022 Osteoarthritis Research Society International (OARSI) World Congress. Berlin, Gemany, April 7-10.
- Quintiens J., and G.H. van Lenthe (2022), Using photon-counting CT for trabecular microstructure quantification: a pilot study, 23rd International Workshop on Quantitative Musculoskeletal Imaging held in conjunction with the 9th International Symposium on Ultrasonic Characterization of Bone (QMSKI 2022), p. O73. Noordwijk, the Netherlands, June 13-17.
- Tits A., S. Blouin, M. Rummler, J.-F. Kaux, P. Drion, G.H. van Lenthe, R. Weinkamer, M. Hartmann, and D. Ruffoni (2022), Combining high-resolution imaging techniques to reveal the structure and function of fibrocartilage at the tendon-bone insertion, 23rd International Workshop on Quantitative Musculoskeletal Imaging held in conjunction with the 9th International Symposium on Ultrasonic Characterization of Bone (QMSKI 2022), p. O48. Noordwijk, the Netherlands, June 13-17.
- Azari F., W. Colyn, J. Bellemans, L. Scheys, and G.H. van Lenthe (2022), In end-stage knee osteoarthritis the subchondral bone microarchitecture of the tibial plateau is correlated to that of the distal femur, 27th Congress of the European Society of Biomechanics (ESB 2022). Porto, Portugal, June 26-29.
- Gardegaront M., A. Sas, F. Bermond, C. Confavreux, J.-B. Pialat, G.H. van Lenthe, H. Follet, and D. Mitton (2022), Replicability of a finite element model to quantify human femur failure load, 27th Congress of the European Society of Biomechanics (ESB 2022). Porto, Portugal, June 26-29.
- Tits A., S. Blouin, M. Rummler, J.-F. Kaux, P. Drion, G.H. van Lenthe, R. Weinkamer, M.A. Hartmann, and D. Ruffoni (2022), Biomechanics and mechanobiology of mineralized fibrocartilage at the tendon-bone attachement, 27th Congress of the European Society of Biomechanics (ESB 2022). Porto, Portugal, June 26-29.
- Lahoud P., W. Lauwers, J. Wyatt, M. Ducret, S. Valette, M. Quirynen, G.H. van Lenthe, R. Jacobs, R. Richert, and M. Ezeldeen (2022), CBCT-based biomechanical models for the study of tooth auto-transplantation outcomes, Oral Health Research Congress (PER-IADR). Marseille, France, Sept. 15-17.
- Azari F., W. Coudyzer, C.E. Wyers, J.P. van den Bergh, and G.H. van Lenthe (2023), Photon-counting CT appears promising in quantifying bone microstructure in the knee, 50th Congress of the European Calcified Tissue Society (ECTS 2023). Liverpool, UK, Apr 15-18.
- van Leeuwen T., M.T. Schneider, G.H. van Lenthe, T. Besier, and E.E. Vereecke (2023), An integrated finite element approach to simulate bone strain response to physiologically realistic loading conditions, 18th Int. Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2023). Paris, France, May 3-5.
- Azari F., W. Coudyzer, C.E. Wyers, J.P. van den Bergh, and G.H. van Lenthe (2023), Quantitative assessment of bone microarchitecture in the human knee using Photon-Counting CT is feasible, 28th Congress of the European Society of Biomechanics (ESB 2023). Maastricht, the Netherlands. July 9-12.
- Müller L., A. Tits, R. Weinkamer, P. Drion, E. Dall'Ara, G.H. van Lenthe, and D. Ruffoni (2023), Changes in subchondral bone microstructure and shape with age in tibial knee, 28th Congress of the European Society of Biomechanics (ESB 2023). Maastricht, the Netherlands. July 9-12.
- Tits A., S. Blouin, M. Rummler, J.-F. Kaux, P. Drion, G.H. van Lenthe, R. Weinkamer, M. Hartmann, and D. Ruffoni (2023), Bone-fibrocartilage crosstalk and osteocyte lacuno-canalicular network at the tendon-bone insertion, 28th Congress of the European Society of Biomechanics (ESB 2023). Maastricht, the Netherlands. July 9-12.